Auto Levels
Digital Theodolites
Survey Accessories
Laser Distance Meters
Laser Levels
Total Station
Marine & Hydrographic
Soil Testing
Aggregate Testing
Concrete Testing
Cement Testing
Asphalt & Bitumen Testing
Single Frequency
HyDrone
Dual Frequency
Single Frequency Gpr
Triple Frequency
SELF-LEVELING LEVEL
Slam200
Slam100
Slam2000
Cable/Pipe locator
Outdoor Laser Measure
Digital Laser Tape Measure
Space Master Series
The apparatus consists of a brass cup, a crank and cam mechanism, mounted on a rubber base of a specified hardness. A brass pin having a knurled end f
View Details
A stainless steel cone with half angle of 15°30’ and 30.5 mm coned length, having smooth polished surface, fitted to a bearing rod moving agai
View Details
The set consists of 75mm square Prong Plate made of 3mm thick acrylic sheet with three metal prongs.
View Details
Density and moisture content are, perhaps, the most important parameters a soil engineer has to keep a strict control on, during the construction of e
View Details
The Automatic Soil Compactor replaces the hand compaction procedure as specified for dry density/moisture content relationship of soil. Both light and
View Details
The pocket penetrometer is regarded as a simple tool to aid the engineers in field exploration and in checking and comparing similar types of soil, bu
View Details
⦁ Compaction Permeameter Mould 1000 ml capacity, clamped between the top and bottom drainage plates having a recess for porous stones. Supplie
View Details
Double walled, inner chamber S.S.304, Outer CRC powder coated , 65 mm thick glass wool insulation , 80/20 nichrome heating elements placed under ribs
View Details
With solid mild steel foot 140 mm diameter and 75 mm height with a concentrically screwed 25 mm diameter solid mild steel staff. The overall length of
View Details
Clay, silt, fine aggregates and other material where absolute density has little variations among sample particles.
View Details
The Apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson Pipette fixed to it to be raised or lowered ve
View Details
MANOMETER: Glass U-tube manometer for measuring low positive pore pressures negative pore pressures and checking zero error of pressure gauge. It is p
View Details
Seamless Brass frame, set consist of 8 sieves - 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron, 150 micron, 75 micron and a set of Lid‑Pan
View Details
Base plate of size 300mm x 300mm with a 152.4 mm dia hole at centre. Base plate shall have four legs of 25mm dia and 275 mm height. Top plate with
View Details
SAND EQUIVALENT VALUE TEST APPARATUS WITH ACCESSORIES
View Details
One loading unit hand operated 5000 kg capacity with two rates of travel One Gun metal mould, 100mm dia x 127.3 cm height X 1000 cc volume with base
View Details
The apparatus shall be confirming to IS: 2720 (Part-XVII), IS 9198 & IS: 11209 latest edition and shall consists of following.
View Details
Supplied complete with 3 speed Load Frame, 2.5 KN or 2 KN Proving ring fitted with dial gauge with Calibration certificate, Dial Gauge of 0.01 X 25 mm
View Details
The equipment comprises a motorized vibratory table of size 75 mm x 75 mm, which operates on 440 Volts, Three phase, A.C. Supply. Also, consists of a
View Details
Vane shear test is a useful method of measuring the shear strength of clay. It is a cheaper and quicker method. The test can also be conducted in the
View Details
The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 2
View Details
The machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive for
View Details
Sed ut perspiciatis, unde omnis iste natus error sit voluptatem accusantium doloremque laudantium